The associated concierge mode allows you to disable monitoring or NIGHT mode. The visitor presses the call button on the 1W panel, and a ringtone will sound. The monitor will display a 30-second countdown timer while the ringing occurs. The monitor will then display video, and you can speak after answering; it will then unlock.

The associated concierge mode enables monitoring. The visitor presses the call button on the 1W panel, and a ringtone sounds. The monitor displays a 15-second timeout while the call rings. The monitor displays video and allows for conversation after the call is answered. Upon unlocking, the call is transferred to the concierge if the monitor does not answer or the door does not unlock.

The associated concierge mode is DAY, the visitor presses the call button on the 1W panel, the callback tone will be sent, the call will be transferred to the concierge.

The concierge can transfer the call from panel 1W.

The panel will call the concierge when the visitor presses the button; the sign will send a special sound if the concierge in NIGHT mode or the general concierge enables ONLY RECEIVE CALLS FROM THE PANEL.
The sign can call the concierge in another way.
The concierge can transfer the call from the lock panel.

The panel will call the concierge when the visitor presses the button; the panel will send a special sound if the concierge has NIGHT mode.
The panel can call the concierge in another way.
The concierge can transfer the call from the lock panel.

The following information is displayed: device name, firmware version, MAC address, panel IP address.

The GENERAL section allows the configuration of the identification parameters of the Nui 1W panel within the installation.

Allows you to set the date and time.

TYPE : Select the panel identification parameter. There are other related parameters depending on the selected TYPE.

General Entrance Panel

Panel installed at one of the main entrances of a condominium.

[Meet panel] General entrance panel webserver

• DEVICE NUMBER: Number assigned to the general entrance where this panel is installed (1-9000).   
  In the case that there is one entrance only, leave the default value 1.
• DEVICE TAG: Text to be shown in the monitor and guard unit.

• CONCIERGE: Each concierge can be assigned a concierge number from 9901 to 9998, depending on the facility.

 

 

Block Entrance Panel

Panel installed on a single building or on a block of a condominium.

[Meet panel] Block Panel Entrance webserver

• BLOCK: Number assigned to the block where the panel has been installed (1-999). In the case of individual blocks, let the default value: 1.
• DEVICE NUMBER: Number assigned to the block entrance where this panel is installed (1-99). In the case that there is one entrance only, leave the default value. 1.
• DEVICE TAG: Text to be shown in the monitor and guard unit.

• CONCIERGE: Each concierge can be assigned a concierge number from 9901 to 9998, depending on the facility.

 

 

1W Panel

For a house or apartment. You can only call an apartment.

[Meet panel] 1 way panel webserver

• BLOCK: Number assigned to the block where the house or apartment belongs (1-999). In the case of individual apartments or houses, leave the default value: 1.
• APARTMENT: Apartment number where this panel is installed. (0001-9899)
• DEVICE NUMBER: Number assigned to this panel (1-9). In the case that there is one panel only, leave the default value 1.
• DEVICE TAG: Text to be shown in the monitor and guard unit.

VIDEO RESOLUTION : To adapt to different types of monitors. The default value is 640×480.

PANEL VOLUME: Select a value between 1 and 5 to adjust the panel's audio output. The default setting is 4.
This volume level affects speech synthesis and notification tones.
The conversation volume adjusts automatically.

[Meet panel] VOICE SYNTH general webserver

VOICE SYNTH：Enables or disables the speech when door lock is released. If the speech is disabled, no speech in the panel will sound when the lock is released.

[Meet panel] Language general webserver

LANGUAGE: Select the desired language in the dropdown options. 

[JX1] 

Default option is ENGLISH.    
Refresh the webpage after changing the language

If select CUSTOM, the custom language will available if the custom language file be imported, the default language (selected language in FROM ) will available if no custom language file is be imported.

The panel will reboot if the custom language be imported or be deleted 

The language file include KEY, DEFAULT STRING, CUSTOM STRING and REMARK.

Do not modify KEY, DEFAULT STRING and REMARK.

The language in default string of exported language file base on selected language in FROM.

CUSTOM STRING is new description, empty or *, the default string still is available if the custom string is empty, do not display anything if the custom string is *.

REMARK prompt that some characters do not require translation.

The VOICE PROMPT file is available when the CUSTOM is be selected, otherwise the voice prompt is default.

• DATE FORMAT: Format to show the date information in the screen.
• DATE: Setting date manually (See NOTE below).
• TIME: Setting time manually (See NOTE below).
• TIME ZONE: Setting the time zone of panel. Select local time zone and save.
• DAYLIGHT SAVING TIME: Shall be enabled for DST periods and disabled for wintertime. 

If the project does not have management software, the installer can manually configure the date, time, and time zone. If the project does have management software, the panel's date and time will automatically synchronize with it. If the panel has internet access, it will also synchronize with the internet time server.

NOTE:
1. THE TIME ZONE is only usable when the time is taken automatically from the internet or from the FERMAX MANAGEMENT SOFTWARE.
2. It is not possible to save the date or time after a power outage, but the time zone and date format can be saved.
3. The web server will display “TOTAL: XXX RECORDS IMPORTED” when the language file is imported.

 

 

If a device has an IP address already assigned to another device on the network,
Both devices will not function properly until this problem is resolved.

DOOR RELAY TIME: Time the door opener relay remains active (1-9s optional).

ADMINISTRATOR CARD: Registered administrator/master card ID for registering additional proximity cards. This option is useful when MEET management software is not available.

If you do not have management software, enter 0000 if you do not know the administrator card ID. The first MIFARE proximity card detected by the reader will act as the administrator/main card. Resident cards can be added later.

To program user cards, present the previously created administrator/master card to the card reader. The panel will enter card programming mode. All cards presented from this point forward will be automatically updated on the panel and can be used to open the door.

If there are no more cards to program, after two minutes the panel will exit programming mode.

It is not possible to deactivate programmed cards using this method. Use the MEET FERMAX management software to take advantage of all operational features.

DISARM BY CARD: When a user card that has been programmed and previously assigned to a monitor is presented to the reader, the alarm system of the corresponding department will change to HOME mode.

ACCESS PIN: No function.

This option allows you to configure the 1W panel to use SIP functions, such as forwarding calls to your smartphone using the FERMAX MEET ME app, or to allow the panel to work with third-party SIP systems or terminals that use the SIP protocol instead of the FERMAX MEET protocol.

ENABLE SIP: Select this checkbox to enable SIP features.

SIP STATUS SEARCH: This button appears when the SIP function is enabled, it displays SIP REGISTERED if the panel was successfully registered or SIP REGISTRATION FAILED if the panel was unsuccessfully registered.

SIP SERVER: Enter the SIP server address. Format -> sip:IP_SERVER

DOMAIN: SIP server domain or IP address.

STUN IP: SIP server domain.

STUN PORT: Used for configuring installations based on Internet SIP servers. It is usually port 5060. Consult your network or SIP server administrator.

TRANSPORT: Options: UDP, TCP, and TLS. Default: UDP. The UDP port is 5060. If no port is specified, the default port is 5060. If no port is specified, sip:sip.fermax.com. The UDP port is 5223 and the TLS port is 4443.

SIP USERNAME, SIP PASSWORD: Indicates the username and password with which this terminal is programmed on the SIP server.

CONVERSATION, BELL TIME : No function.

NOTE: When the panel is used as a SIP device, use speed dial to call SIP devices or receive calls from other SIP devices; the SIP function must be enabled.

APARTMENT: The panel calls the resident.

NUMBER: The monitor, the call divert APP and the SIP device.

DELETE: Delete Apartment and number.

Speed dial is associated with a monitor, a concierge or a SIP terminal.

SPEED DIAL: Activates or deactivates the speed dial function.

NOTE: Speed dial works when the panel is a general panel or a block panel; the panel does not call the concierge.

URL : If calling the MEET system device, URL: sip: SIP account @ IP address of the MEET device (the SIP account is optional). If calling the SIP device, URL: sip: SIP account @ IP address of the SIP server.

ONU (GPON): Enables or disables the SIP penetration firewall function.

[Meet panel] Management webserver

Use this functionality to import, export configuration file, reboot remotely  the panel, return it to factory settings, or log out webserver

CONFIGURATION FILE: Allow installers to save a backup of its configuration via export button, later apply that previously exported file via import button to the same or a different panel with same version.

• The exported configuration file do not include imported picture, the language file ,directory file and sip call file.
• Press import button, the pop will appear.

• Press SKIP, the general settings from be imported configuration file, if the general settings is different with imported configuration file, modify general settings and press OK.

RESTORE FACTORY SETTINGS: All factory settings will be restored. The IP address will be changed to the default: 10.1.1.2.