[Monitor Duox Iris] Installer Settings 4.3"
Written by Ping-En Shih
Updated at November 16th, 2026
Ref: 5256/9257/9258/9259
Accessing the installer menu:
*This menu will only be available after the first programming.

- Press the multifunction buttons 1 and 4 at the same time to access the Installer Menu.

- Press the multifunction button 1 to return to the previous menu.
- Press the multifunction buttons 2 and 3 to navigate through the different options.
- Press the multifunction button 4 to select the option.
Enabling/Disabling options:

- Press the multifunction button 1 to return to the previous menu.
- Press the multifunction buttons 2 and 3 to navigate through the different options.
- Press the multifunction button 4 to enable/disable the function.
Photocaller:

- It must be enabled by the installer and also in the user menu to be able to use the photocaller (call image recording).
Inductive loop:

(Only on monitors with the inductive loop)
- Activate the inductive loop function.
Programming:
- Consult the PROGRAMMING section for more information.
Information:


- Information can be obtained through the QR.
FW Version:


- From here you can view the FW version and the unique identifier of the device.
Installer reset:

- The installer reset will set all monitor values to factory parameters, including user and installer values.
- The default values for user reset are already described in the USER SETTINGS section.
Values for the installer reset: - Loop: OFF
- Conversation mode:
1. [HANDSFREE (HF)]
2. PRESS TO TALK (PTT) - Doormatic Enable/Disable: OFF
- Automatic capture (Photo): ON
- Address DUOX of residence: No address
- Concierge:
1. Address: NO.
2. Mode: NIGHT - Concierge panic mode (SOS)
1. Address: NO
2. Mode: OFF
Download Article