Fermax Knowledge Base

970136 Manual Installer meet guard unit

Published September 11th, 2025 by Tecnico Internacional

Product Introduction The following document is the installer manual for the FERMAX MEET Guard Unit, corresponding to the ref.95391 with firmware V03.70. It is required, when installed in v3.0 MEET installations, to enable “Backward compatibility” function via webserver to ensure the Guard Unit is compatible with the installation. See chapter 3.2 Gen

970140 Lift Control Gateway

Published February 17th, 2026 by Tecnico Internacional

Introduction new version 3.0 The new 3.0 version of the Lift Control Gateway provides new functionalities to the previous version: Function Description V2.0 V3.0 Use cases 1 Lifts per block 1 8 Private lift, resident and visitor lifts 2 Different lifts for different panels Same lift Free assignation Private lift, resident and visitor lifts 3 License

970190 Marine/Milo panel installation manual

Published May 8th, 2025 by Tecnico Internacional

Description The Milo Digital Panel (ref: 1832) and the Marine Panel (ref: 1455) share the same firmware. Therefore, the configuration sections of the manual are common. For a quick view of the panel’s hardware, please select the desired panel below: MARINE PANEL REF. 1455 V03.70 MILO DIGITAL VIDEO PANEL POE MEET REF. 1832 V03.70 [Meet panel]

970089 WIT A10/A Monitor Installer Manual

Published May 8th, 2025 by Tecnico Internacional

Description The following document is the Installation Manual for the FERMAX MEET range monitors, corresponding to WIT A10/A monitor V03.70. The monitor includes the Android 10 operating system and allows the installation of third-party applications. Fermax is not responsible for any incompatibilities with the hardware or operating system if the in

970137 Installer manual Milo 1W Panel

Published May 12th, 2025 by Tecnico Internacional

Description [Meet panel] Description note (mifare) NOTE: Residents can access to their corresponding entrance by passing their autho NOTE: Residents can access to their corresponding entrance by passing their authorized Mifare identifier(not available for 7-byte cards).. The door will open and release the lock. The Mifare identifier data must be a

970162 Kin Panel installation

Published May 9th, 2025 by Tecnico Internacional

Description [Meet panel] Description note (mifare) NOTE: Residents can access to their corresponding entrance by passing their autho NOTE: Residents can access to their corresponding entrance by passing their authorized Mifare identifier(not available for 7-byte cards).. The door will open and release the lock. The Mifare identifier data must be add

WIT A10/A Monitor User

Published May 8th, 2025 by Tecnico Internacional

Description The following document is the User Manual for the monitors of the FERMAX MEET range, corresponding to the WIT A10/A monitor V03.70. CALL RECEPTION Calling from an access point [Meet monitor] Calling from a panel MEET monitors can receive calls from both the outdoor panels of the block corresp MEET monitors can receive calls from both th

970201 Neo monitor user manual

Published July 11th, 2025 by Tecnico Internacional

Description The following document is the User Manual for the NEO 7' display and firmware V03.70 The layout and quantity of icons in the main menu depends on the installer configuration. Call reception Call from panel [Meet monitor] Calling from a panel MEET monitors can receive calls from both the outdoor panels of the block corresp... MEET monitor

NEO Monitor Installer

Published May 7th, 2025 by Tecnico Internacional

Description The following document is the Installation Manual for the NEO 7’ MEET monitor, with firmware V03.70 Installation Stand placement [Meet monitor installation] Stand placement Before installing the MEET monitor, the corresponding installation stand must be Before installing the MEET monitor, the corresponding installation stand must be pla